Double Glazing Window Locks Repairs
Double glazing window locks repairs are essential to protect your home. Faulty handles or hinges can let draughts in to your home and expose your windows to burglars.
Fortunately, it's not difficult to fix stiff uPVC handles and locks without replacing your door or window. Simply cooling or oiling the mechanisms can often help solve any problems.
Broken Glass
Window locks made of double glazing can be worn out over time. When this happens, the handles can become difficult to open, or even close. This can lead to problems with ventilation, and could also create a security risk. It's important that you get the window fixed as soon as possible.
Double-glazed windows are made up of two or more glass panes with gas in between to provide insulation. double glazing repairs hold the panes together. If you notice condensation between the glass panes, it is likely that one of these seals requires replacement. This will typically involve replacing only one pane of the window and is cheaper than replacing the entire window.
A blown seal in a double glazed window usually causes cloudiness and condensation. It can be caused by a number of causes, including air leaks or an excess amount of moisture in the property. It's important to contact an expert in double glazing to repair the gas and seal your double-glazed window immediately you notice this problem.
It is possible to replace one pane of double glazing glass, but it is not recommended to do so without the help of an expert. This is because it requires special tools and knowledge to perform the task safely. You could damage the window frame or your health if you try to do it yourself.
When a double-glazed windows is stuck, a lot of people employ a crowbar to attempt to open it. But, it usually causes the frame to be damaged and scratched. A window specialist will be able to take off the handle and open the window without causing any further damage. They can also convert the old window mechanisms into modern ones.
Over time, window hinges can become stiffer and more difficult to open, especially when the area is noisy. To prevent this from happening it's recommended to lubricate the hinges on a regular basis with silicone spray. It's also important to avoid shutting the window with a heavy hand or closing it with handles, as this can damage the hinges and lock mechanism.
Broken Sash
This is a common problem for older double glazing windows. It isn't easy to lock and open a window if the upper sash is out of its pocket. This is usually because the pins are disengaged or a balance shoe is disconnected. It is important to know the way your sash has been configured before you attempt to fix it.
It can be resolved by removing the sash and cleaning it thoroughly. This will let you know whether it's still a good fit. If not, you can add sash stoppers to secure it. They are available online or at most hardware stores. After cleaning the sash, you can replace the parting beads and lubricate pulley axles using Teflon or silicon spray. It's a good idea label the weights prior to you remove them to make sure you can put them back in correctly.
Another issue that is frequently encountered is a damaged handle. It can be hard to tell if your windows handle is broken however there are a few indicators. If the handle feels stiff or clunky to operate, or it doesn't feel as if it's securely attached to the wall, then it's damaged.
It could be due to lack of use, or the handle could be broken or become detached. In some cases the handle may be damaged inside and cannot be repaired however it's worth attempting to fix it as soon as you notice the issue.
To remove the window sash, you may need to remove hinges that secure it to the frame. It's a challenging task, so you'll require someone to assist you in holding the sash securely. After removing the hinges it's important to clean them as well as the areas around them. It is also recommended to attach the hinges again and test the handle to be sure it's functioning properly. If it doesn't, you may want to look into replacing it. This will ensure that your window is as safe as it could be.
Broken Handle
The window handle is a delicate part with intricate mechanisms, and it's unusual for them to wear out or break over time. It is therefore essential that broken handles are repaired as quickly as you can to avoid inability to function and security issues.
It is, however, not difficult to replace a window handle. The window handle can be easily replaced by anyone with a few DIY skills. Contrary to the sash that is secured using multiple bolts, the window handle requires only one or two screws. After the new handle is in place, it's crucial to test it to make sure the mechanisms are operating properly. This should include locking the handle and examining for gaps that might let in drafts or allow criminals to gain access to your home.
The most frequent cause of broken handles on a window is simply wear and tear caused by repeated use. A damaged handle could also be the result of excessive force or stress. If you force the window to open, it could add additional stress to the handle. This increases the risk of injury.
Other causes for a damaged handle are poor maintenance, ageing or design issues. The handle may wear out quickly due to the absence of regular cleaning and oiling. This is typically caused by dirt or debris that has accumulated over time. In addition the handle may be weakened by incorrect installation or alignment issues.
If the suggestions above do not work, the Tasker will need to gain access to the lock and take it off itself. This may involve removal of the frame or 'breaking out' the window frame as well as plastic bead (to give the Tasker more room to maneuver). The new lock can be fitted to match the profile of the uPVC handle. After this is completed the new handle will be fixed and the process is completed. Tasker will give you an estimate for the cost of repair in the event that this is the case.
A faulty Lock
If window locks are damaged, it's vital to repair the issue as soon as you can. A broken window can cause draughts, weaken security barriers and expose your home to burglary. Window lock repairs are typically small, but it's better to consult a professional before the problem gets worse and costs you more money.
UPVC window locks come with two different versions: espagnolette handles and the cockspur handles. The former uses a centre rod to control the mushroom-like locking cams, which lock into the window frame. The lock's mushroom cams are activated by a handle connected to a spindle. The latch of the lock clips into the mortise, and it is then snared by a window frame.
Both kinds of UPVC window locks are susceptible to damage, particularly in older homes. This can happen if the sash is damaged, warped, misaligned or even comes loose. In these situations the lock must be reinstalled to prevent draughts as well as loss of efficiency. A Tasker will replace the damaged locks for you and provide you with peace of mind knowing that your windows are safe from intruders.
A Tasker will examine your double glazing window and identify the problem. Once they have the necessary details, they'll set up their tools before arriving at your home. They'll typically bring a Phillips head screwdriver and needle nose pliers, wood glue and fine-grit papers.
If the sash is misaligned, the Tasker will need to loosen the screws securing both pieces of the lock to the frame. The Tasker will then take off the latch and fill the mounting holes (if appropriate) with wood putty, after which they sand the area to make it as flush as the rest.
If the lock is rusted, they'll clean it using a wire brush or oil, and then lubricate it with grease to ensure it's working smoothly. They'll also determine if the latch is in good condition and replace it.